{"id":567,"date":"2017-10-15T16:54:09","date_gmt":"2017-10-15T21:54:09","guid":{"rendered":"http:\/\/insanityautomation.com\/?p=567"},"modified":"2021-11-17T12:25:23","modified_gmt":"2021-11-17T17:25:23","slug":"new-printer-to-the-bunch-cr10-s5","status":"publish","type":"post","link":"https:\/\/insanityautomation.com\/index.php\/2017\/10\/15\/new-printer-to-the-bunch-cr10-s5\/","title":{"rendered":"New printer to the bunch : CR10-S5"},"content":{"rendered":"

A recent order required a number of large ABS+ parts, so I ordered a 500mm cube printer to handle them. Tiny Machines got the machine to me about a week after ordering, so they did a great job rushing it out for me. The machine as it comes is fairly simple. They do include a filament runout sensor, however there is no builtin automatic bed leveling. With a 500mm aluminum plate, that gets to be a bit difficult. I got the machine with the Keenovo 110v heated bed. This is a 1300w heating element under the entire thing. The stock board comes with only a 300mm heater. Tiny machines was also able to put in an E3D extruder along with a plated micro swiss nozzle.<\/p>\n

The first thing I did was set about building an enclosure for the new printer. Once I had a wooden frame, I mounted the bowden extruder as close as the existing wiring would allow me. I added a PEI sheet to the print bed. I printed a new extruder mount with a BL Touch sensor mount out of Polymaker PC-Plus.<\/p>\n

Here are the changes from stock in my hit list : <\/p>\n