The firmware branches maintained here are made possible by the support of sponsors like Tiny Machines 3D as well as our customer base through 3D printing services. If you would like to support continued development, please consider you’re next machine purchase from Tiny Machines and thank them for supporting open source development or consider ordering anything outside you’re own machines capabilities through us! If you dont need anything printed or any additional machines, you can also support us through Patreon here – https://www.patreon.com/InsanityAutomation

  • Creality Firmware Branches
    • Now that we have configured an auto build, we are able to provide quite a few HEX file configurations. There is an issue with Windows systems limiting path depth however so the file names need to be shorter than we would prefer. Therefore, here is a legend to decoding what they are
      • AC – Keenovo AC bed heater
      • BLT – BLTouch
      • BIL – Bilinear Leveling
      • UBL – Unified Bed Leveling
      • DZ – Dual Z Steppers
      • Fil – FilamentRunout
      • Slnt – Creality Silent Board
      • H – E3D Hemera Extruder
      • LR – Lerdge Filament Sensor
      • MC – Mosquito Creality mount
      • ME – Mosquito E3D mount
      • Host – For Melzi ONLY – option disables local SD card to allow more features and buffer for Octoprint control
      • SD – For Melzi ONLY – SD card functions normally, reduced host features and menus
      • NF – Noise filtering for machines with cable extensions – reduces homing accuracy!
      • EZABL – TH3D EZABL or other Normally Open 18mm Sensor
      • 12mm – TH3D 12mm EZABL or other Normally Open 18mm Sensor
      • 422 – Creality STM32F1 based Motherboard 4.2.2
      • 427 – Creality STM32F1 based Motherboard 4.2.7
      • ET – E3D or Slice Engineering 300C Thermistor
      • ST – Slice Engineering 450C Thermistor
      • PT – Slice Engineering PT1000 Temperature Sensor
      • 50W – PID settings for 50 watt Slice Engineering heater cartridge